the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Delayed Pulsed Ground On Pulsed Ground Input Possible?


Post ReplyPost New Topic
< Prev Topic Next Topic >
juppers 
Member - Posts: 2
Member spacespace
Joined: August 14, 2006
Posted: November 06, 2023 at 2:45 PM / IP Logged Link to Post Post Reply Quote juppers
I'm attempting to automate up and down on a rear window of a SUV. The alarm can only send a single pulsed ground signal as the trunk release function.
I have a PAC TR-7 in mode #8 that is close to what I need, but I need to generate a delayed second ground pulse to unlatch the outputs after 5 seconds.
Any ideas on a timer IC or circuit design that could accomplish what I'm looking for, or should I just scrap the TR-7 and move on to a microcontroller to handle the logic?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, December 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer