spacer spacer spacer spacer

2015 Ford Fiesta, Wiring For Mobokey

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: November 06, 2023
Location: Australia
Posted: November 06, 2023 at 9:47 PM / IP Logged Link to Post Post Reply Quote r1ngst1nger
I want to install a Mobokey device in my 2015 Ford Fiesta (Australia RHD model).
From doing some research and some testing myself, the central locking button (located on centre dash) will alternate the signal between lock/unlock and so on.
I want it so the actual lock or unlock message is sent from the Mobokey device, as if it were the remote key fob pressing the button. I hope that makes sense?
Does anyone know a way to wire up a lock signal to the Mobokey device?
From what I understand, there's a BCM which does the flip/flop message, but there is also a door control module that may be able to do this properly.
Any ideas?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, July 18, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer