the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 4806v Not Reporting Correct Lock Status With Passive Locking


Post ReplyPost New Topic
< Prev Topic Next Topic >
juppers 
Member - Posts: 2
Member spacespace
Joined: August 14, 2006
Posted: November 17, 2023 at 7:25 AM / IP Logged Link to Post Post Reply Quote juppers
I have a 4806v and when it locks via passive locking it reports as unlocked when queried from the remote. Everything works correctly when actively locked and unlocked. Could I have mis-wired something or is this just a system bug I've stumbled onto?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, June 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer