the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

IDatastart CMHCXAO, Trunk Output?


Post ReplyPost New Topic
< Prev Topic Next Topic >
smcross03 
Member - Posts: 5
Member spacespace
Joined: January†17, 2019
Location: Ohio, United States
Posted: January†31, 2024 at 7:48 PM / IP Logged Link to Post Post Reply Quote smcross03
Hello,
Iím installing an iDatastart RS on a 2015 Armada and I
am looking for some confirmation on whether, or not, the negative trunk trigger makes a contact to ground when activated. The power liftgate switch on my Armada only makes a connection to ground when pressed. Ultimately trying to determine if I can just connect the trigger wire to the appropriate side of the switch or if should use the trigger in conjunction with a relay. Your help is greatly appreciated. I attached an image for reference.IDatastart CMHCXAO, Trunk Output? - Last Post -- posted image.IDatastart CMHCXAO, Trunk Output? - Last Post -- posted image.
Thanks
smcross03 
Member - Posts: 5
Member spacespace
Joined: January†17, 2019
Location: Ohio, United States
Posted: January†31, 2024 at 7:51 PM / IP Logged Link to Post Post Reply Quote smcross03
Adding additional details
2015 Nissan Armada Platinum
W/ intellikey. Not push to start but a keyless ignition
IDatastart CMHCXAO
kreg357 
Platinum - Posts: 7,791
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January†30, 2009
Location: Pennsylvania, United States
Posted: January†31, 2024 at 8:33 PM / IP Logged Link to Post Post Reply Quote kreg357
First a little terminology. Trunk Trigger and Trunk Release.
Trunk Trigger is M3-08 Blue w/Silver Dot wire. It is looking for a (-) Input that means the trunk is open
Trunk Release is M2-03 Red/White w/Black Dot wire. It outputs a (-) signal on a trunk release command.
The Trunk Release can be programmed for various output durations, Default is .8 seconds. See Menu 2 Feature 2.
Additional programming for Trunk Release sequence - see Menu 2 Feature 14.
Anyway, connecting the R/S M2-03 Red/White Trunk Release wire to the vehicles wire at Pin 1 of the Power Liftgate Switch will work.
Below is the wire color info :
Trunk Release Activation   BLUE/WHITE(-)   POWER LIFTGATE SWITCH GREY 6 PIN CONN, PIN 1
Soldering is fun!
smcross03 
Member - Posts: 5
Member spacespace
Joined: January†17, 2019
Location: Ohio, United States
Posted: February†01, 2024 at 5:12 AM / IP Logged Link to Post Post Reply Quote smcross03
Kreg357,
Thank you for the education in terminology and confirming what I had hoped was true!!
Have a great day!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 24, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer