1999 Isuzu NPR, Viper 4706V Remote Start/Stop Engine System Problem

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Isuzu NPR, Viper 4706V Remote Start/Stop Engine System Problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

andrescifu

Member - Posts: 1

Joined: March 12, 2024

Location: Connecticut, United States

Posted: March 12, 2024 at 3:44 PM / IP Logged

Has anyone installed a remote start on an Isuzu NPR 99? The ignition harness, in addition to the ignition, starter, accessories and constant 12 wires, has three wires that go to the solenoid that shuts off the engine. I think one wire goes to ground, another has 12V when it's off and 0 when the switch is opened and the other wire has 0 when it's off and 12 when it's on when it's turned on. The ground wire has continuity with the other two wires. I tried to replace the switch with two relays but it didn't work. The system is a Viper 4706V. Can anybody help me?

Andrescifu

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.