spacer spacer spacer spacer

1999 Isuzu NPR, Viper 4706V Remote Start/Stop Engine System Problem

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: March 12, 2024
Location: Connecticut, United States
Posted: March 12, 2024 at 3:44 PM / IP Logged Link to Post Post Reply Quote andrescifu
Has anyone installed a remote start on an Isuzu NPR 99? The ignition harness, in addition to the ignition, starter, accessories and constant 12 wires, has three wires that go to the solenoid that shuts off the engine. I think one wire goes to ground, another has 12V when it's off and 0 when the switch is opened and the other wire has 0 when it's off and 12 when it's on when it's turned on. The ground wire has continuity with the other two wires. I tried to replace the switch with two relays but it didn't work. The system is a Viper 4706V. Can anybody help me?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, May 30, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer