Drive Lock Issue, CM900AS, Blade-AL, 2014 Subaru Outback

Hi everyone, I appreciate the time to read and help. I am using a cm900as brain with the BLADE-AL on a 2014 Subaru outback standard key. Everything works great and I am well versed in wiring so it all was fine on the first try with the exception of the automatic door lock. On the flash Option Group 1 I have Ignition controlled door locks set to ON and also on the 2 way compustar remote I have enabled the drive lock. If I start my car and turn it off nothing will happen. If I start my car and drive the doors will not ever lock. After parking and turning my car off it will trigger the doors to unlock which is normal behavior. The problem is when I put my foot on the brake its supposed to lock the doors but it never does. I have also tried the RPM Lock option on the flash, its supposed to lock the doors at 20 percent over the idle RPM but that is not working either. I'm thinking the BLADE-AL isn't telling the brain that the brake is applied. But I know it can tell this because you have to apply the brake for take over on remote start.