Compustar Shock Sensor Won’t Trigger Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Compustar Shock Sensor Won’t Trigger Alarm

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ag0261

Member - Posts: 1

Joined: April 18, 2024

Location: Kentucky, United States

Posted: April 20, 2024 at 12:28 AM / IP Logged

Hi I just installed my new Compustar 752A with one way remote without remote start on 2003 Volvo S60 and all I have connected to are the doer locks and parking lights, the parking lights is connected through a relay since my car has negative input for the lights, after the is set the LED light starts flashing for being armed and the LED light on my shock sensor blinks once then goes off, even if I tap on the shock sensor it won’t trigger the alarm, does anyone know or can help me to troubleshoot or is there some kind of setting that I need to change or what to look for.

Thanks.

Back to Top

silvercivicsir

Copper - Posts: 406

Joined: November 21, 2003

Posted: April 29, 2024 at 3:06 PM / IP Logged

you have to wait a minute for the shock sensor .. doors and trunk will be instant trigger..

Back to Top

Search for other posts by silvercivicsir

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.