2019 Kia Sportage LX, Lighting Controller Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2019 Kia Sportage LX, Lighting Controller Wiring

Welcome Guest :)

Members

< Prev Topic Next Topic >

gigglywolf

Member - Posts: 1

Joined: May 28, 2024

Location: Colorado, United States

Posted: May 28, 2024 at 9:41 AM / IP Logged

Trying to find the following wires on a 2019 Kia Sportage LX AWD - Prefer A Location In Drivers Kick Panel Wiring Loom - By Master Disconnect / Drivers Fuse Panel

1: Door Lock Motor +12v - (Anything that gets +12 when remote lock is used (maybe the lock horn wire)

2: Highbeam Trigger Wire (When High Beams Get Activated Gets +12v)

3: L/R Turn Signal

4: Trunk Hatch Open Sensor (Might Be Able to use the light thats back in the hatch)

Its for a special install for inputs into a lighting controller

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.