Basic Remote Start, 1995 Chevrolet C/K 2500

Home / the12volt's Install Bay / Car Security and Convenience / Basic Remote Start, 1995 Chevrolet C/K 2500

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

john sicuro

Member - Posts: 8

Joined: December 10, 2024

Location: Ontario, Canada

Posted: December 10, 2024 at 8:00 AM / IP Logged

Hello all, first post and just signed up. Where was this site years ago. Lots of good info on here.

Will be installing a very basic remote start in my 95 k2500 with no power locks. Question is what do I do about the pwr lock signal wire if the remote start requires the signal to initiate the start?

Jack of all trades, master of none lol

lee.lopez

Copper - Posts: 187

Joined: September 02, 2024

Location: Texas, United States

Posted: December 10, 2024 at 10:22 AM / IP Logged

Have you already purchased a system? Can you return it? Are you planning to install power locks?

john sicuro

Member - Posts: 8

Joined: December 10, 2024

Location: Ontario, Canada

Posted: December 10, 2024 at 10:43 AM / IP Logged

Hello, I have already purchased it and no i can't return it. No I was not planning on installing power locks. This is a basic work truck with a basic 1 button remote start system I want to install for this winter.

Jack of all trades, master of none lol

lee.lopez

Copper - Posts: 187

Joined: September 02, 2024

Location: Texas, United States

Posted: December 10, 2024 at 12:37 PM / IP Logged

What is the brand and model remote start, or do you have a link to a manual or diagram?

john sicuro

Member - Posts: 8

Joined: December 10, 2024

Location: Ontario, Canada

Posted: December 10, 2024 at 1:13 PM / IP Logged

It's called Auto Command by Design Tech. It only has 500ft range with a single button remote. Got it BNIB never installed. Pretty sure it's atleast 15-20yrs old.

Jack of all trades, master of none lol

chev104275

Gold - Posts: 1,436

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 10, 2024 at 1:20 PM / IP Logged

Do you have a model number for the system? In your first post you said it requires a lock signal to initiate the start sequence but in your second post you said it's a 1 button start system. Does the system come with a separate remote?

If i Can't Install it I Don't need it Joe

john sicuro

Member - Posts: 8

Joined: December 10, 2024

Location: Ontario, Canada

Posted: December 10, 2024 at 1:48 PM / IP Logged

I will get you the part number when I get home later tonight. It only came with a single remote and one button on it. The way i was reading the instructions, I thought it needed to have a remote door lock wire connected in order to start the truck. Of course my truck does not have that option.

Jack of all trades, master of none lol

chev104275

Gold - Posts: 1,436

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: December 11, 2024 at 7:20 AM / IP Logged

if it came with a remote I wouldn't think it needs to see a lock signal to start. That is typically used when remote start control is wanted from a factory remote.

If i Can't Install it I Don't need it Joe

john sicuro

Member - Posts: 8

Joined: December 10, 2024

Location: Ontario, Canada

Posted: December 11, 2024 at 7:36 AM / IP Logged

chev104275 wrote:

if it came with a remote I wouldn't think it needs to see a lock signal to start. That is typically used when remote start control is wanted from a factory remote.

Ok makes sense so how do I fool the RS in thinking there is a door lock signal then?

Jack of all trades, master of none lol

lee.lopez

Copper - Posts: 187

Joined: September 02, 2024

Location: Texas, United States

Posted: December 11, 2024 at 8:52 AM / IP Logged

Did you find the model number? If you have a remote, it would make sense you don't need a lock wire.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.