2010 Dodge Ram 1500, Door Locks

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Dodge Ram 1500, Door Locks

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tnemes73

Member - Posts: 1

Joined: March 04, 2020

Location: Ohio, United States

Posted: May 23, 2025 at 7:30 PM / IP Logged

Hey everyone.

I'm wanting to install a aftermarket lock actuator in my tailgate (already installed and wires ran to the dkp).

What I'm need to know is, can I wire directly to the door lock wires, or do I need to use relays, in a specific relay setup? I'm going to be using a axxess axutr, to only lock the tailgate when remote lock button is pressed twice.

Thanks everyone!

Troy Nemes

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.