Compustar OP500 Connection To Antenna

Home / the12volt's Install Bay / Car Security and Convenience / Compustar OP500 Connection To Antenna

Welcome Guest :)

Members

< Prev Topic Next Topic >

gunnye7t

Member - Posts: 1

Joined: October 15, 2025

Location: Indiana, United States

Posted: October 20, 2025 at 4:50 PM / IP Logged

Compustar T13 install with CMX.

Needing to program 3-16 to Option 2 ( KP2 )

Instructions state to connect the OP500 to the antenna cable. Is this referring to the ANT-2WSF proximity antenna ?

If so, I cannot determine how to remove the cable from the antenna. There are no visible release tabs or mechanisms.

Also, how to determine present firmware version on the OP500.

Seller (eBay) advertised latest firmware.

I do have the cable with the module in the middle of the cable.

And I have version 33_2020.ENC file and updater program.

Thanks in advance.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.