the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Two horn


Post ReplyPost New Topic
< Prev Topic Next Topic >
pokoponboo 
Member - Posts: 4
Member spacespace
Joined: June 16, 2003
Location: Japan
Posted: June 19, 2003 at 8:59 AM / IP Logged  
Hi everyone.  I want to install another horn in my car and I want a switch so I can use one at the time, switching them when I want to.  What do I need to do?
David in Japan
fredisfound 
Copper - Posts: 60
Copper spacespace
Joined: June 17, 2002
Location: Australia
Posted: July 04, 2003 at 4:59 AM / IP Logged  
Hi David, all you need is a three way switch, ( on, off on)set it up in the original wiring to work the original horn on one side and the other horn on the other side. is easy, I have done it for other things so it will do as you want. Good luck.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer