would the factory disarm output unlock...

Home / the12volt's Install Bay / Car Security and Convenience / would the factory disarm output unlock... (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Bigkevin20

Copper - Posts: 84

Joined: May 20, 2003

Location: United States

Posted: June 24, 2003 at 10:42 AM / IP Logged

My factory alarm will go off if the remote start cuts on. My DEI Hornet 554T has a diarm output so this wont happen. Well my 2000 Dodge Durango has a Negative 1 wire lock/unluck door lock system. So in theory im thinking if it disarmed the alarm so it can start wouldnt my doors unlock.

Also If I have to use a relay and resistor on the - lock output and the - unlock out put. do I have to use a resistor on the factory diarm out put?

Back to Top

Bigkevin20

Copper - Posts: 84

Joined: May 20, 2003

Location: United States

Posted: June 24, 2003 at 11:03 AM / IP Logged

the door unlocking would defeat the purpose and leave my truck open when the remote is running. Please I need advice

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 24, 2003 at 12:15 PM / IP Logged

Must use relays and set up for (-) negative trigger. Place a 647 ohm resistor to the lt. GREEN/ orange for arm/lock, and a 1562 ohm resistor on the same wire for disarm/unlock. Unlock requires a double pulse.

Use this diagram for the relay configuration

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

would the factory disarm output unlock...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.