the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Adding onto Bose factory system


Post ReplyPost New Topic
< Prev Topic Next Topic >
ghs_wreslter189 
Copper - Posts: 52
Copper spacespace
Joined: June 29, 2003
Location: United States
Posted: June 29, 2003 at 10:52 PM / IP Logged  

I recently purchased a 1998 Oldsmobile Intrigue.  It came with a factory Bose system including a cd player, 5-1/4"s and tweeters, 6x9s and tweeters, and a factory amplifier.  I already switched out the cd player and I am planning on adding my MTX 81000D and 2 Kicker XPL 15"s.

The problem is that I only have to turn up the volme to about 8 or 10 before it is almost too loud for the speakers.  I don't want to have to turn up the gain too much on my amplifier, yet I don't want to blow the Bose speakers because they sound awesome...any suggestions?

--Adam
esmith69 
Gold - Posts: 1,511
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 26, 2002
Location: United States
Posted: June 30, 2003 at 10:15 AM / IP Logged  
When you put in the aftermarket head unit, how did you connect it to the factory wiring?  Did you use a bose or premium sound system interface?  Or did you just hook it up as if it were a regular system, using a 32-pin GM wiring harness?
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com
ghs_wreslter189 
Copper - Posts: 52
Copper spacespace
Joined: June 29, 2003
Location: United States
Posted: June 30, 2003 at 10:51 AM / IP Logged  

I hooked it up as if it were a regular system.  I know that a lot of people tell you not to do so with Bose because of the impedance; however, all of the speakers are on an amplifier and the cd player is pretty outdated anyway so I am not worried about it.

I was wondering if there was a way to change the gain on the Bose amplifier.

--Adam
esmith69 
Gold - Posts: 1,511
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 26, 2002
Location: United States
Posted: June 30, 2003 at 2:26 PM / IP Logged  

Nope there are no controls for/on the bose amplifier, so the only way to control the volume really is to adjust the level of the bose input.

So are the bose amps still being used?  or is your aftermarket head unit powering all of the bose speakers?

The proper way to have everything hooked up, so that the bose amplifier does not get too high of an input signal, as well as to send power to your sub amp in the future, you'll use the aftermarket head unit's preamp output(s) to send a signal to the sub amp.

In order to keep using the bose speakers and have it all work right, you need to get an integration adapter, as this will let you adjust the level of the signal that gets input into the bose amp, so that it matches up properly.

Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com
ghs_wreslter189 
Copper - Posts: 52
Copper spacespace
Joined: June 29, 2003
Location: United States
Posted: June 30, 2003 at 10:27 PM / IP Logged  

I had already planned on using the preouts on the cd player for the sub amp, I just wish their was an easier way to control the Bose amp.

I am not sure if all eight speakers are connected to the Bose amp or which ones aren't but I will check soon.

It would probably be best to use all aftermarket speakers instead.

--Adam
ghs_wreslter189 
Copper - Posts: 52
Copper spacespace
Joined: June 29, 2003
Location: United States
Posted: June 30, 2003 at 10:32 PM / IP Logged  

I will use RCAs for the sub amp but I wish there was a way to control the Bose gain.

I am not sure which speakers are connected to the Bose amp but I will check.  It is probably best to use all aftermarket speakers anyway.

--Adam

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer