SW2 + RS3 wiring

Home / the12volt's Install Bay / Car Security and Convenience / SW2 + RS3 wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rudbwoy69camaro

Silver - Posts: 350

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 10, 2003

Location: United States

Posted: July 01, 2003 at 9:45 AM / IP Logged

Correct me if I am wrong. I will need to use diagram 3. yellow wire of sw2 to RED / white of rs3, green wire of sw2 to orange of rs3, and for the WHITE/ yellow of the sw2;relay to reverse polarity to connect to the brown wire(+) of the rs3. Diode on the green wire, and WHITE/ yellow wire of sw2. Please let me know. (Sorry about the size of the pic)

Thank you in advance for your time.

SW2 + RS3 wiring -- posted image.

Back to Top

Search for other posts by rudbwoy69camaro

mr12volt

Member - Posts: 28

Joined: June 17, 2003

Posted: July 02, 2003 at 8:35 PM / IP Logged

What was the Question???

Back to Top

rudbwoy69camaro

Silver - Posts: 350

Joined: June 10, 2003

Location: United States

Posted: July 03, 2003 at 12:03 AM / IP Logged

In reply to "mr12volt" :

I am connecting the Smartwindows 2 to the Matrix RS3. I have the diagram posted above, and am asking if this is the correct way to wire it.

Back to Top

nighthawk2k

Copper - Posts: 116

Joined: June 02, 2003

Location: United States

Posted: July 03, 2003 at 2:39 AM / IP Logged

Ok what you want to do is:

1. Connect the green wire of the Sw2 to the orange starter kill wire. Use two Diodes. One to the Starter Kill and one to the windows. The stripe of the diodes goes towards the brain of the alarm.

2. Connect the Yellow wire of the sw2 to the Purple black wire(CH4) do not hook it to CH2 because channel 2 has a silent/latch feature.

3. Use a relay to tap onto the siren's (+) signal to make it ground for the windows.

85- Siren

86- Ground

30- SW2 WHITE/ Yellow

87a- (N/C) Nothing Here

87- (N/O) Chassis Ground

That's it for the install of the SW2 Module to a RS3.

Good Luck

If you have any questions feel free to ask

Tommy

-Clifford/Directed/Alpine-Audio & Security-

New York Installer SW2 + RS3 wiring -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

SW2 + RS3 wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.