viper alarm

Home / the12volt's Install Bay / Car Security and Convenience / viper alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

boatracer

Member - Posts: 27

Joined: June 22, 2003

Location: United States

Posted: July 05, 2003 at 3:31 PM / IP Logged

I have installed the viper 790xv in my 2003 dodge quad cab truck. I am having trouble with the remote start. it was working fine but now it will start and run like three seconds and shut down. It is telling me on the lcd flash codes that it is not sensing the tach. What should I check for?? I think that I have the right wire for the tach hooked up, how do you tell??? Also when I arm and disarm the alarm, when I open the door the factory alarm will go off, how do I bypass that????

Thanks Kevin

there are no stupid questions, so always ask!!!!

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: July 05, 2003 at 10:25 PM / IP Logged

tach wires: the easiest place to find it is your fuel injectors, thats if you can reach it for certain cars. probe with a voltage of 1-6v AC, the voltage increase when revving on the gas.

have you try usin voltage sense insteach of tach.

am assumin this is a Ram:

Factory Disarm Light GREEN/ Orange (-) Driver's Kick Panel tie it to the disarm wire.

i believe this car has a immobilizer, be sure to bypass that.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.