1999 Corrola DRL Cut Out

There should be just a relay that activates the DRL's in the passenger kick panel. It's a grey box that is marked DAY TIME RUNNING LIGHTS RELAY " . If the 1999 Corolla does not have this in this location, get someone to turn the car on and off and you should hear a click from the relay. * Make sure that the hand brake is not engaged for obvious reasons .

It's amazing what you can find if you put your mind to it  . Here's some info for most Toyota vehicles:

TOYOTA. From the Toyota technical service bulletin EL011-00 Web site for specific models determine where the module is; either the DRL relay or the body ECU, connector number, pin #. Oct 6,2000.

Avalon 1999     DRL relay     D4  pin 1Avalon 2000     body ECU      B5  pin 6Camry S/D 99*   DRL relay     D6  pin 23Camry S/D 00*   DRL relay     D6  pin 10 *twilight sentinelCamry Solara99/00* DRL relay  D6  pin 23Celica 2000*    body ECU      B6  pin 17Corolla 99/00*  DRL relay     D3  pin 23ECHO 2000       DRL relay     D2  pin 124Runner 2000    DRL relay     D8  pin 2Land Cruiser 99/00 DRL relay  D8  pin 2MR@ Spyder 2000 DRL relay     D2  pin 12RAV4 99/00      DRL relay     D17 pin 2Sierra 99/00    DRL relay     D4  pin 2Tacoma 2000     DRL relay     D8  pin 2Tundra 2000     DRL relay     D7  pin 2

-disconnect battery- Then remove the wire with pin attached and tape to the harness. (consider just cut and tape the wire) -check operation- [except the 2000 MY-Avalon, additionally you need to ground the wire at the module end of the cut wire] does anyone know if there is a DRL relay that can be "fixed" ?