2000 Nissan Maxima Alarm/Remote Start Wiring

does anyone ahve the wire diagrams for the door lock on a 2000 nissan maxima and the wire diagrams for the factory security module and transponder unit

just curious, are you trying to put in an add-on RS?

yes i am installing a crimestopper 2011 rs i also have the dei 555u bypass module

12V|green               |+ |ignition harness            | |          STARTER|BLACK/ red or blk/wht|+ |ignition harness            | |   SECOND STARTER|BLACK/ blue          |+ |ignition harness            | |        IGNITION|BLACK/ red (smaller) |+ |ignition harness            | |        ACCESSORY|RED / yellow          |+ |ignition harness            | | SECOND ACCESSORY|WHITE/ blue          |+ |ignition harness            | |       POWER LOCK|gray               |- |pin 23 at SECU *1           | |     POWER UNLOCK|BROWN / yel           |- |pin 35 at SECU *1           | |       LOCK MOTOR|purple              |   |pin 15 at SECU *1           | |     UNLOCK MOTOR|WHITE/ black        |   |pin 13 at SECU *1           | |    DISARM DEFEAT|GREEN/ YELLOW        |   |pin 14 at SECU *1           | | PARKING LIGHTS +|RED / blue            |   |driver kick panel *2        | | PARKING LIGHTS -|lt. blue            |   |headlight switch            | |       HEADLIGHTS|pink               |- |headlight relay *7          | |     DOOR TRIGGER|*3                  |   |SECU *1                     | | DOME SUPERVISION|use door trigger    |   |                            | | TRUNK/HATCH PIN|purple / YELLOW       |- |pin 38 at SECU *1           | |        HOOD PIN|yellow/red          |- |pin 27 at SECU *1           | |TRNK/HTCH RELEASE|blue               |*4 |pin 12 at SECU *1           | | FCTRY ALARM ARM|ORANGE / black        |- |pin 41 at SECU *1           | |FCTRY ALRM DISARM|ORANGE / blue        |- |pin 30 at SECU *1           | |       TACHOMETER|WHITE/ green        |   |instrument cluster *5       | |      SPEED SENSE|pink/blue           |   |instrument cluster *6       | |       BRAKE WIRE|RED / green           |+ |brake switch or drivers kick NOTE: This vehicle has an immobilizer system that needs to be bypassed during remote start operation. Use DEI part number 555U. *1 The SECU (Smart Entrance Control Unit) is located to the passengers side of the steering column. *2 Can also find RED / green or RED / yellow at fuse box. *3 Find lt. blue for the drivers door in pin 29, RED / blue for the passenger front door in pin 40, and RED / white for the rear doors in pin 28. Use all 3 wires and diode isolate each.    *4 Requires a high-current ground for activation. *5 Located on the rear of the instrument cluster in the white plug. Do not start the car with the cluster unplugged. Can also find the WHITE/ green at the ECM located in the front of the center console on the transmission hump. The wiring is easily reached by removing the panel just to the front of the center console on the passenger side. DO NOT UNPLUG THE ECM. *6 Located on the rear of the instrument cluster in the 20 pin brown plug. Do not start the car with the cluster unplugged. Can also find the wire at the ECM. *7 The headlight relay is in the relay box under the hood.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

just want to make sure, is this unit a stand alone unit or for addon to another unit?

thanks      it is a stand alone unit   you wouldnt happen to know how to wire up a window roll up/down module to the same car with   the down feature going to the channell 1

skipastaria wrote: thanks      it is a stand alone unit   you wouldnt happen to know how to wire up a window roll up/down module to the same car with   the down feature going to the channell 1

also what is the disarm defeat and    whats the door trigger about i thought its only 1 click drivers 2 clicks all doors how would i hook it up i have three wires 1(red) for door lock/unlock -/+ 1(red) 12+ for relays 1 (blue) door lock/unlock -/+ but a bigger problem is is there a fuse or i havent installed the alarm but the door locks wont work i hear the relays click but only the drivers door locks (doesnt unlock) the other doors do nothing i think i burned a fuse, fusable link , or relay   ive checked all of those things except some of the relays but there is nothing in my car that says anything to do with doors fuse wise