sting pro remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / sting pro remote start problems (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 14, 2003 at 4:50 PM / IP Logged

i bought a stingpro alarm/remote starter off of ebay and i hooked up the wires except for the power doors and windows because i have manual windows and doors. When I hit the start button the fuel pump kicks on and then it doesn't crank and the fuel pump kicks on about 4 times. Please help me i have been working on this for two full days and i cant figure it out.

P.S. If this helps at all the model number is dx710

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: July 14, 2003 at 7:36 PM / IP Logged

What car are you putting it in?

J Rilla

Owner/Installer

enjoylife

Member - Posts: 5

Joined: July 09, 2003

Location: United States

Posted: July 14, 2003 at 9:14 PM / IP Logged

what vehicle, and what wires to what color do u have hooked up?

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 16, 2003 at 10:32 AM / IP Logged

i have a 1996 chevy cavlier Ls. I was wondering do i have to cut the starter wire.

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 20, 2003 at 8:35 AM / IP Logged

i installed the stingpro dx 710 in my cavalier but ihave the two green wires from teh relay unhooked and it cranks fine. I got it to start and it seemed like the starter was running to long. After I got it started a few times it wont start the vehicle it just cranks on my starter for a long time

cool_greg

Copper - Posts: 125

Joined: February 20, 2003

Location: New Zealand

Posted: July 20, 2003 at 10:03 AM / IP Logged

does the key have a little black chip in it?, if it does, try putting the key in the ign. and then remote starting it, if that works then you will have to bypass the "passlock" during remote starting, there are a number of bypass unit avaliable.

Just a Guy, Wiring up those Vehicals

---------------------------------

Gool_Greg

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 20, 2003 at 4:30 PM / IP Logged

no i dont have the chip in my key. And i put a transponder kit on my car because i had a different remote starter installed. It worked with my other remote starter

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: July 22, 2003 at 9:18 PM / IP Logged

What are you using to interface with Passlock I?

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 24, 2003 at 12:36 PM / IP Logged

i have a dei passlock bypass and i have that hooked up right and it working because it worked with my old remote starter

ryan_lindy

Member - Posts: 7

Joined: July 14, 2003

Posted: July 24, 2003 at 12:36 PM / IP Logged

where do the 2 green wires off of the relay get hooked up to

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.