fuse box problem

Home / the12volt's Install Bay / General Discussion / fuse box problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jlseven

Member - Posts: 2

Joined: July 15, 2003

Location: United States

Posted: July 16, 2003 at 12:21 PM / IP Logged

i hardwired my radar detector to my fuse box using a fuse blade tap. i first tried the radio fuse, but the detector wouldn't shut off when the car was turned off. i then tried the airbag fuse and it worked. the problem is that the tap widened the space for the radio fuse to the point that the fuse is loose and the only way to make the connection is to leave the tap in. is there any way to tighten the connections for the loose fuse?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 18, 2003 at 11:42 PM / IP Logged

take a needle pick and pry the terminals closer.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

copcarguy

Copper - Posts: 122

Joined: February 12, 2003

Location: Pennsylvania, United States

Posted: July 19, 2003 at 9:27 AM / IP Logged

put another fuse tap in where you pulled it out and just don't use it.

R Jackson

Owner/Installer

TRM Emergency Vehicles

Information is advice only and should be confirmed with OEM or quality test equipment.

Boyertown, Pennsylvania

Back to Top

jlseven

Member - Posts: 2

Joined: July 15, 2003

Location: United States

Posted: July 22, 2003 at 12:47 PM / IP Logged

thanks for the help fuse box problem -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fuse box problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.