ANL Fuse questions

Home / the12volt's Install Bay / Car Audio / ANL Fuse questions (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

littleredwagon

Member - Posts: 2

Joined: July 22, 2003

Location: United States

Posted: July 22, 2003 at 11:01 AM / IP Logged

I will be running 2 amps one reccommends a 50A fuse and the other a 60A fuse for a total of 110A. I have a fused distribution block in the rear of the car to send power to the amps.

My question is what size ANL fuse should I use near the battery? I have been unable to find one that is 110A. I have only seen 100A and 150A ANL fuse so far.

Any recommendation would be great.

Search for other posts by littleredwagon

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: July 22, 2003 at 11:09 AM / IP Logged

the 100 amp will work fine for you, 100 amps is a lot of current draw and is only 10 amps from your worst case draw before your amps catch on fire,

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ANL Fuse questions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.