Help with 1999 Accord alarm

[QUOTE=Velocity Motors

2. DOOR TRIGGER           BLACK/ white         |-  |     passenger fuse box In a green 4 pin connector. You do not need to hook up the (+) door pin switch wire from the alarm anywhere. Tape it off and DO NOT USE

After i hooked this wire to my comon lock wire on my alarm keyless entry started working.I was pre infored on the immobilezer system and glued my key close to the ign switch .... Remote start now works!!#1 I still cant find a wire to tell the alarm that the doors are open. My alarm auto aarms 25 seconds after u disarm it only if no doors are open .

You can't find the BLACK/ WHITE wire at the passenger fuse box in the GREEN 4 pin connector ?? This wire tells the alarm that the doors are openJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

i hooke that wire up to my comon lock it seems to do nothing when i hook it up to the door switch + or - on my alarm

You are not connecting this right. The BLACK/ WHITE wire is an output wire for the alarm's DOOR TRIGGER WIRE not LOCK wire. You have to find the alarm's DOOR TRIGGER wire and attach the BLACK/ WHITE wier to it.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

i dont think he mention tach wire yet. could this oil light be it?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

yea i hook the oil light wire from the alarm to the tach

so that is the tach wire then?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).