Alpine Alarm Install?

Home / the12volt's Install Bay / Car Security and Convenience / Alpine Alarm Install? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 07, 2003 at 9:21 PM / IP Logged

Anyone familiar with Alpine door lock/unlock wiring? My brother had this Alpine SEC-8028 alarm, and he had a friend that installs alarms try to install it, but couldn't figure out the lock/unlock part of the Alpine unit. It has door unlock and lock relays onboard with the brain. There is: Door Lock Common, Door Lock N/C, Door Lock N/O, Door Unlock N/O, Door Unlock Common, and Door Unlock N/C. Why are there so many different wires? My care only requires 2 wires for door lock/unlock. Which wires would I use?

Also, does anyone know if the newer Alpine SEC-100S and SEC-150R uses this same wiring?

The car is my 1993 Honda Prelude VTEC.

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: August 08, 2003 at 7:45 AM / IP Logged

Ay caramba! I downloaded the manual for your alarm at www.alpine-usa.com. That's some install manual. Anyway, I see the 5 wires that you're talking about. I also was looking at the flowchart, and it almost looks like you have to program it for (-) or (+) door locks? I'm not sure, though, I would wait for a better response. I would check out the manual in the meantime if you don't already have it. It's not very detailed, but might help.

www.alpine-usa.com (go to the Tech-center)

Q: What's the best nation in the world?

A: Donation! Donate to the12volt.com

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 08, 2003 at 11:30 AM / IP Logged

You only need to use the following:

BROWN / RED & GREEN/ RED wire goes to GROUND
WHITE/ BROWN wire goes to LOCK wire on Prelude
WHITE/ GREEN wire goes to UNLOCK on Prelude
GREEN/ BLUE & BROWN / BLUE wires are not used.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine Alarm Install?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.