2001 Nissan Quest Stereo wiring diagram

I need to install a RF modulated CD Changer for a friend. I found the 2000 Quest wiring from this site. Is it the same for 2001? If not can someone please post wire colors for +12V (constant for memory), -12V (ground) and switched +12V (power) for me? Thanks in advance.

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|WHITE/ red           |+  |ignition harness            ||          STARTER|BLACK / YELLOW        |+  |ignition harness            ||   SECOND STARTER|BLACK/ green         |+  |ignition harness            ||         IGNITION|BLACK/ white         |+  |ignition harness            ||        ACCESSORY|blue                |+  |ignition harness            || SECOND ACCESSORY|red                 |+  |ignition harness            ||       POWER LOCK|red                 |-  |either door harness         ||     POWER UNLOCK|RED / black *3        |-  |either door harness         ||       LOCK MOTOR|GREEN/ YELLOW        |   |drivers door harness        ||     UNLOCK MOTOR|WHITE/ green         |   |drivers door harness        ||    DISARM DEFEAT|WHITE/ red           |   |passengers door harness     || PARKING LIGHTS +|do NOT use          |   |                            || PARKING LIGHTS -|gray/red            |   |headlight switch            ||       HEADLIGHTS|yellow              |-  |headlight switch            ||     DOOR TRIGGER|*1                  |-  |*1                          || DOME SUPERVISION|BROWN / white         |-  |low in drivers kick         ||  TRUNK/HATCH PIN|with door trigger   |   |                            ||         HOOD PIN|BLACK/ pink          |-  |harness behind fuse box     ||  FCTRY ALARM ARM|arms with lock      |   |                            ||FCTRY ALRM DISARM|disarms with unlock |   |                            || DISARM NO UNLOCK|*4                  |   |                            ||       TACHOMETER|white               |   |pin 2 @ PCM *2              ||      SPEED SENSE|GREEN/ YELLOW        |   |pin 27 @ PCM *2             ||       BRAKE WIRE|yellow/black        |+  |brake pedal switch          ||     HORN TRIGGER|lt. blue/black      |-  |steering column             ||           WIPERS|blu/orn & brn/wht   |-  |wiper motor                 ||  LF WINDOW UP/DN|blu/red - purple    |A  |drivers window switch       ||  RF WINDOW UP/DN|grn/blk - orange    |A  |drivers door harness        ||  LR WINDOW UP/DN|RED / blk - RED / yel   |A  |drivers door harness        ||  RR WINDOW UP/DN|orn/blu - red       |A  |drivers door harness        || SUN RF OPN/CLOSE|not recommended     |   |                            ||        RADIO 12V|BROWN / white         |+  |radio                       ||     RADIO GROUND|black               |-  |radio                       ||     RADIO SWITCH|orange              |+  |radio                       || RADIO ILLUMINATE|                    |   |                            ||       LF SPEAKER|                    |   |                            ||       RF SPEAKER|                    |   |                            ||       LR SPEAKER|                    |   |                            ||       RR SPEAKER|                    |   |                            |

Notes:

*1 Low in the drivers kick find red for the drivers door and RED / white for the liftgate.  In the passengers kick find RED / white for the passenger front door, and RED / green for the sliding doors.  Use all trigger wires and diode isolate each.  *2 The PCM is located behind the glove box.   *3 Unlock requires double pulse.   *4 A single pulse on the unlock wire will disarm the factory alarm without unlocking

Thanks amicro. I need the wires in the Radio wiring harness. Do you have those? Sorry but I am a nubie at this so if the wires labeled Radio in your post are the ones, I apologize. Please let me know which ones to splice in the Radio harness. Thanks

Amicropimp, Thanks for the information. I found the wires as indicated by your post and installed the cd changer. It works great. Once again, thanks a lot. :)

dvpatel wrote: Thanks amicro. I need the wires in the Radio wiring harness. Do you have those? Sorry but I am a nubie at this so if the wires labeled Radio in your post are the ones, I apologize. Please let me know which ones to splice in the Radio harness. Thanks