which tester do you guys use?

Home / the12volt's Install Bay / Car Security and Convenience / which tester do you guys use? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

IronCy

Copper - Posts: 93

Joined: February 16, 2003

Posted: August 11, 2003 at 2:30 PM / IP Logged

I own "the probe" as well, and dont know what I would do without it! It gets a thumbs up from this user!

-Cy

Back to Top

Montrealler

Copper - Posts: 155

Joined: October 05, 2002

Location: Canada

Posted: August 11, 2003 at 9:05 PM / IP Logged

What do you think of this one ....

1K

12v------/\/\/\/--------|

| green led

|----->|---|

| |------------->probe

|-----<|---|

1k | red led

gnd------/\/\/\/--------|

Since I use it i canot live without it. I also need a good dmm for volt,curent and resistivity.

Yes I'm Back 2006...

Back to Top

royarvind

Member - Posts: 13

Joined: August 06, 2003

Location: New Zealand

Posted: August 14, 2003 at 5:00 PM / IP Logged

Thanks very much guys for your help.

Back to Top

xetmes

Silver - Posts: 586

Joined: May 18, 2003

Posted: August 14, 2003 at 6:52 PM / IP Logged

Im thinking of making a powered probe since they all seem draw too much current (even the "computer safe' ones it seems.) I figure input inpedence around 100K or higher would be good.

Motrealler, that should work, i would probably put a diode in series with each LED, yea i know LEDs function as diodes, but they dont do very well with reverse biasing.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

which tester do you guys use?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.