Type R's and which amp.Hurry need to ordr

i'm getting a two alpine type r 12 inch dual voiice coil 4 ohm...which amps would be better to get jbl 1200.1, two 600.1, or two alpine mrd 500's, i was told that if i get the 1200.1 i would be wiring the subs to a 1 ohm level and the amp couldn't really handle that and to get the 2 amps..which is bettter. And how should i wire it...and untill i get those amps can i use my rockford 400s on those subs...if so how can i wire it

I also agree that the 1200.1 is your best choice

same. The BP1200.1 is your best choice.Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Go with the 1ohm stable amp. I used to run 2 Apline Type R 12 DVCs off a crapy old Sony xm-3001SXD... their clamed 1000 watt amp.(600 in reality). It was the cheapest thing I could find stable to 1 ohm... needless to say, under powered or not, they hit HARD.. and it was a cheap set up.