really need help please

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / really need help please (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

xetmes

Silver - Posts: 586

Joined: May 18, 2003

Posted: August 14, 2003 at 6:55 PM / IP Logged

i dont know you guys are couragous i would be scared to death of that foam crap around a car, whenever i use it on a window or somthing it ends up all over, i thinks its impossible to remove, well for me at least really need help please - Page 2 -- posted image.

really need help please - Page 2 -- posted image.

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: August 14, 2003 at 7:32 PM / IP Logged

im making the box outside of the car.

dream it, build it, fiberglass it

iaudio

Copper - Posts: 82

Joined: March 17, 2003

Posted: August 14, 2003 at 10:02 PM / IP Logged

Try Great stuff (red can). Let it expand and then shape it with a cheese grater. I know the 2 part stuff from Select Products will work but I'm not entirely shure about the stuff that comes in a can.

kustomcarluvr

Copper - Posts: 73

Joined: April 25, 2003

Location: United States

Posted: August 15, 2003 at 9:58 AM / IP Logged

I had actually used great stuff, and the resin warms up so much and because of the reaction between the two that it does not keep the same shape as you made the foam. Some spots stay right, and other turn into divits. I had this problem with a few different projects that I did, and I ended up using a whole lot of body filler to fill all of the divits.

Matt

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

really need help please

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.