help,power window not working!

Home / the12volt's Install Bay / Car Security and Convenience / help,power window not working! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jac2

Member - Posts: 36

Joined: August 15, 2003

Posted: September 04, 2003 at 6:46 PM / IP Logged

i installed hornet 554t in my 2000 honda accord v6 coupe (i didnt connected the door lock/unlock wire because instruction said i need a relay to connect with it,and it doesnt came with the door lock/unlock relay!!!)since then my right side powerlock and power window didnt work,so i took alarm off the car.and somehow i fixed the lock,i just touched lock/unlock wires with my tester and it works fine after that but right side power window still not working.it sounds tick,tick when i push the switch up and down.seems like sending a power but not even moving a bit .is there any possible reason that cause this kinda problem??

jac2

Member - Posts: 36

Joined: August 15, 2003

Posted: September 04, 2003 at 9:58 PM / IP Logged

i have to close the window before rain.anybody??! plz help!!

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 04, 2003 at 9:59 PM / IP Logged

Check all the fuses in the car. You sure nothing came unplugged?

You don't need any additional relays to do locks on that car. They are negative trigger/

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help,power window not working!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.