Need for a Window Module? Please Help

PLease excuse if I posted this twice I didn't think it went throught the first time. I bought an alarm off of ebay here is a link to the alarm (not the ebay auction): http://www.stingpro.com/category8.htm it is the StingPro DX-710 Model. I have a 92 toyota paseo that had manual everything and put in door acutators. I got the alarm installed and got everything working good even the keyless entry (first time doing this so a pat on my back) anyway, i was so thrilled with having power door locks that i want to add power windows so i purchased a SPAL power window kit. My question is do I need a window module in order for the alarm to roll up and down my windows? The alarm has a window closer output (as mentioned in the above link) and in the instruction booklet (if you can call it that just tells you the fucntions of the remote and then has a tiny wiring diagram no step-by-step instructions) it has 3 wires coming off the alarm unit and it reads as follows:

Pink/White-------->Open Window (-  out)

Pink/Black--------->Close Windows (- out)

Pink------------------> Ignition 2 (- out)  i believe this goes to the BLACK/ red wire in the iginition harness right?

also in the booklet it says that to roll up windows hold arm button for 2 sec and to roll down hold disarm button for 2 sec. So do I need a module or do I just hook the wires (pink/white...etc.) right into the wiring harness to the window kit motors. Also if i need a module do I need 2 of them one for rolling up and one for rolling down? If a module is needed do the above wires go into the wires coming from the module. PLease let me know because i dont want to spend money on a module if i dont need to. Also does anyone know what the (-out) is for after the functions of the wires mentioned above. Thank you so much.