which position sound better?

Home / the12volt's Install Bay / Car Audio / which position sound better? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

skyRyder

Copper - Posts: 57

Joined: August 15, 2003

Location: Australia

Posted: September 14, 2003 at 6:53 PM / IP Logged

hey guys ... while i build my box, and i want to do some creation and something that look good.... below are the pic of the box that i have desing.

which position sound better? -- posted image.

this design, when the subby in set in the middle of the box.....

which position sound better? -- posted image.

and this one is design for the subby off-set to the side of the box

Are these 2 design (boxes) make any different in sound quality or anything at all? Or they will be the same sound and no different ? i am sure someone in this forum has experienced in these type or design.. my cousin said off-set subby to a side sound better...

thank alot guys!! :D

Proud to be L O U D!!

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: September 14, 2003 at 8:31 PM / IP Logged

what type of box is it? sealed, ported, or transmission line?

I need quality equipment, feel free to donate.

skyRyder

Copper - Posts: 57

Joined: August 15, 2003

Location: Australia

Posted: September 14, 2003 at 9:07 PM / IP Logged

oh!! sorry forget to list this.... they both are SEALED box!!!

Proud to be L O U D!!

skyRyder

Copper - Posts: 57

Joined: August 15, 2003

Location: Australia

Posted: September 15, 2003 at 12:38 AM / IP Logged

comm'n guys. i am pretty sure ppl in here at least know it pretty well about this!!,.... i need to know by tonite!! coz i am going to cut some lettering design, and i wont wast another chance to build another box..... i wasted too much time on this box already!!...

help and ideas will be muchly appreciated!! thank in advance

Proud to be L O U D!!

alarmpro

Copper - Posts: 110

Joined: September 17, 2002

Location: United States

Posted: September 15, 2003 at 1:10 AM / IP Logged

In my opinion it should be offset to the side to lower the level of standing waves inside the box... lets then move over to one side instead of crashing against each other....

CBates

Copper - Posts: 58

Joined: September 08, 2003

Location: United States

Posted: September 15, 2003 at 8:20 PM / IP Logged

It wont make a difference in a sealed enclosure. As far as standing waves go, a little pollyfill will help with that. Unless your pretty good at building truncated pyramid (trapazoidal) enclosures, your going to get standing waves.

They call it PMS because Mad Cow Disease was already taken.....

nedgeworth

Silver - Posts: 264

Joined: November 03, 2002

Location: Australia

Posted: September 15, 2003 at 8:31 PM / IP Logged

At most it will make only a slight difference in my opinion. Basically is it's going to make it better for what you want to do with your lettering than go for it. I don't see it making a mess of how your sub should sound.

skyRyder

Copper - Posts: 57

Joined: August 15, 2003

Location: Australia

Posted: September 15, 2003 at 8:46 PM / IP Logged

thank guys!! yours opinions and ideas are very helpfull.... i will tell u guys about the different, coz we do have another one in the middle with the PG-15" but with a bigger volum....

Proud to be L O U D!!

Thugstyle

Member - Posts: 22

Joined: May 31, 2003

Location: United States

Posted: September 17, 2003 at 4:07 PM / IP Logged

i would say put the sub to the left and put a grill over the sub for looks..then add ports to it..i just had ports added to my dual 15" box and it pounds.

nedgeworth

Silver - Posts: 264

Joined: November 03, 2002

Location: Australia

Posted: September 17, 2003 at 4:11 PM / IP Logged

Everybody has different tastes and requirements, so you can just assume they are looking for more output from there subs. So it's a good idea to find out what they are looking for before you assume they want more bass.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

which position sound better?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.