how to wire subs?

Home / the12volt's Install Bay / Car Audio / how to wire subs? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mustang90

Member - Posts: 10

Joined: August 04, 2003

Location: United States

Posted: September 17, 2003 at 7:50 PM / IP Logged

I have 2 12" adiobahn AW126T I want to put a 2ohm load on them and a 2ohm load on my amp. What is the best way to wire them so they hit there hardest??? Thanks for your time.

spl/luxy

Member - Posts: 25

Joined: August 06, 2003

Location: Australia

Posted: September 17, 2003 at 10:43 PM / IP Logged

Well i dont know anything about the subs that you own, however it is the subs impedance that determines the amplifier loading.so if your subs are say single 4ohm voice coils you can wire them in parralel(neg-neg and pos-pos from each sub then run a pos and a neg cable to one channel on your amplifier this will then show a 2ohm load to the amp. if they are not single 4 ohm subs just remember that parralel wiring will halve your impedance and series wiring will double the impedance. if you are still not sure there is a wiring chart on this site somewhere that will show you what i'm talkin about.

C-ya

Australia's Loudest Street Max 3-4 Car Ever!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to wire subs?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.