wiring between sidewall and door

Home / the12volt's Install Bay / Car Security and Convenience / wiring between sidewall and door (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

80085

Copper - Posts: 93

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 22, 2003

Location: Canada

Posted: September 18, 2003 at 10:06 AM / IP Logged

i recently added a smartwindows 4 to my concept 200. vehicle is 99 civic coupe.

i had to drill a new hole in the door to run the 8 wires from the smartwindows module. i bought a grommet to seal the hole. my concern is that if my door would ever have to be removed, those wires would have to be cut. i was thinking of cutting them now, and putting male connectors on one end and female connectors on the other. but, if possible, does anyone know where i can get harness plugs, minimum of 8-pins?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 18, 2003 at 10:27 AM / IP Logged

For molex plugs you can try one of your big auto parts stores or a wrecker. Just go to any vehicle and cut the plug off any 8 pin wires that you can find and re-attach the wires to what you need in the doors of the Civic.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

80085

Copper - Posts: 93

Joined: June 22, 2003

Location: Canada

Posted: September 18, 2003 at 10:29 AM / IP Logged

alright, cool. thanks jeff. i'll try that.

Back to Top

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 18, 2003 at 9:04 PM / IP Logged

Whenever I need to make some sort of quick disconnect harness, I just buy a 70 & 71 series of a Metra wire harness. The 70 series is the female harness and the 71 series is the male harness and the wire colors are the same on both ends of the harness.

Back to Top

80085

Copper - Posts: 93

Joined: June 22, 2003

Location: Canada

Posted: September 19, 2003 at 8:07 AM / IP Logged

c2deez, how many pins/wires does it allow you to connect?

Back to Top

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 19, 2003 at 9:36 PM / IP Logged

Most harnesses allow 14 pins, you can use a 2 part harness and just use the speaker side and you would have 8 pins.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring between sidewall and door

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.