02 dodge ram

Home / the12volt's Install Bay / Car Security and Convenience / 02 dodge ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dan768

Copper - Posts: 49

Joined: July 13, 2002

Location: United States

Posted: July 13, 2002 at 1:51 AM / IP Logged

When I install an aftermarket alarm on top of the rams o.e.keyless I grab three motor wires that act real screwy, I have been hooking up my arm , disarm, and 2 disarm each to ground through 10k ohm resistors, with a 1k ohm on my arm (in line) to prevent arming on auto unlock.

Has anyone seen this type of behavior on motor wires?

Got any other tricks?

dan

Remember (there are no hard cars,some just take longer to install on then others)

Back to Top

christophe

Member - Posts: 34

Joined: June 09, 2002

Location: United States

Posted: July 13, 2002 at 8:25 PM / IP Logged

I've got arm/lock as a neg. trigger through a 2k ohm and disarm neg. 480 ohm. btw disarm w/o unlock 1 pulse double pulse to unlock.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 dodge ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.