Front Leather Seat Removal

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Front Leather Seat Removal (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

udratherbme

Member - Posts: 21

Joined: September 17, 2002

Location: United States

Posted: September 26, 2003 at 5:24 AM / IP Logged

I have a 2001 Chrysler Concodre and I would like to know how to remove the leather seat cover to run TV wires? and if I can draw power from them? They have a constant 12v feed to them, the seats still operate after the switch has been turned off?

Doin' It Down Souph, So Holla @ Cha Boi

exxxotic audio

Member - Posts: 13

Joined: September 30, 2003

Location: United States

Posted: October 01, 2003 at 8:39 PM / IP Logged

try to unplug the wires and unbolt the seat remove from car and you should see a seem to unzip or if not place your tv and make the proper cuts and use a metal coat hanger and electrical tape. tape the tv wires to the hanger and feed them through the seat hope that helps.

Search for other posts by exxxotic audio

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Front Leather Seat Removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.