Code Alarm Systems

Home / the12volt's Install Bay / Car Security and Convenience / Code Alarm Systems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gmjf

Member - Posts: 1

Joined: July 14, 2002

Location: United States

Posted: July 14, 2002 at 7:49 PM / IP Logged

My system has stop working. I use to get a flashing light when it was armed, now I get a double flashing light all the time. Can anyone help me reset the system. I bought the car used and the system was installed already. I have no owners manual on how todo anything

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: July 15, 2002 at 6:29 AM / IP Logged

Does your remote say what kind of alarm you have? It should, but if not....poke around under the dash and try to find out what brand / type you have.

mike simonelli

Member - Posts: 26

Joined: July 14, 2002

Location: United States

Posted: July 15, 2002 at 9:52 PM / IP Logged

well if it is a code alarm a double light flash means its armed and a single means it has a open trigger.

Search for other posts by mike simonelli

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Code Alarm Systems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.