amp problem

Home / the12volt's Install Bay / Car Audio / amp problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

wvsquirrel

Gold - Posts: 1,237

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 27, 2002

Location: Florida, United States

Posted: October 15, 2003 at 8:45 AM / IP Logged

Unfortunately the only way I know of is audibly with either hooking the sub up to another amp, or hooking a different sub up to the current amp.

I believe you can turn on your current setup and test the connection with a DMM set to OHMS. Test the connections at the amp and at each set of terminals on the sub. I'm not sure if it will change if the sub is blown or not, perhapse one of the experts could further advise you on this one...

Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: October 15, 2003 at 11:12 AM / IP Logged

to check if the sub is blown simply get out your DMM and use the resistance setting to check that the sub reads the propper resistance, ie. 2ohm for a dvc 4ohm in parallel, 8ohm for a dvc 4ohm in series, 4ohm for svc 4ohm etc.

Quad L Handyman services

gregkgkemp

Member - Posts: 5

Joined: September 14, 2003

Location: United States

Posted: October 15, 2003 at 1:29 PM / IP Logged

i'll try it and post an update. thanks

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.