Help PAC OS-2Bose

Home / the12volt's Install Bay / Car Audio / Help PAC OS-2Bose (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

foxforce5

Member - Posts: 3

Joined: October 26, 2003

Posted: October 26, 2003 at 12:40 AM / IP Logged

I have installed a KVT-911 in my 2003 H2 using the PAC OS-2BOSE adapter. The thing works great it and retains my Bose & Onstar; however, any time I start the motor everything resets and I've got no sound. I've wired the yellow wires of the HU to the yellow on the adapter and did the same with the red. Is it possible that I've got a bum adapter?? Any ideas would be greatly appreciated.

Back to Top

go2pac

Copper - Posts: 179

Joined: May 04, 2002

Location: California, United States

Posted: October 26, 2003 at 11:24 AM / IP Logged

There is a sticker on the back of the interface, make sure its rev. 1.3.8 or higher. Otherwise return it to where you got it from and have them get a newer version.

Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976

Back to Top

foxforce5

Member - Posts: 3

Joined: October 26, 2003

Posted: October 26, 2003 at 6:45 PM / IP Logged

WOW, This is customer service. Thanks for your reply! The label says REV. 1. 3. 10 so I assume this is okay. I continued to monkey w/ it and was finally able to get the HU to work with the engine running by connecting the blue/white wire on the adapter to the blue/white wire on the KVT-911. Now it doesn't do the 10 minute shut off until you open the door thing. I'm thinking it is because now there is no place for the KVT-911 pink/black wire to go on the interface. Any suggestions that you have would be greatly appreciated. Pardon my ignorance.

Thanks for having such a great and needed product.

I'll be posting my final install results and the results of the SWI-X on http://www.elcova.com/h2/ and www.ultimatehummermag.com

Back to Top

foxforce5

Member - Posts: 3

Joined: October 26, 2003

Posted: October 28, 2003 at 8:43 PM / IP Logged

Anyone else out there know about these adapters?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help PAC OS-2Bose

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.