Factory Driving Light wiring Nissan Sentr

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Factory Driving Light wiring Nissan Sentr (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: November 01, 2003 at 8:04 PM / IP Logged

Hi there, I am trying to install a set of driving lights in my car. It is a 2001 Nissan Sentra Xe. The holes are there and it looks like there is already factory wiring ( lights were a option). Do you think I can use these wires and just install a fuse and swith??? or should I just use the wires that came with the lights I purchased.???

Back to Top

hotrodelectric

Copper - Posts: 112

Joined: March 13, 2002

Location: United States

Posted: November 06, 2003 at 9:57 PM / IP Logged

If the complete harness is in place, save yourself some grief and use the factory wiring. I don't speak Nissan very well (a by product of playing with Citroens all my life) but I will bet the factory light switch either has a setting for the lamps, or you can get the factory switch fairly easily, if not cheaply.

Back to Top

hotrodelectric

Copper - Posts: 112

Joined: March 13, 2002

Location: United States

Posted: November 06, 2003 at 10:00 PM / IP Logged

You may also have to buy the factory relay. Just so long as you aren't trying to drive, say, a set of Cibie SuperOscars the factory wiring should cover you.

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: November 07, 2003 at 5:14 AM / IP Logged

You would have to find the wires on the inside too or the wires on the outside don't do you any good. Also there should be a blank spot in the fuse box for the factory fogs. Basically it comes down to how much time you want to put into these things. If you want to have them on and functional in an hour just wire everything up yourself. If you want a nice clean factory look, do some research and see how close you can get. Course that will take a lot more time..Good luck

Mike

Back to Top

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: November 07, 2003 at 7:55 AM / IP Logged

Hi there. I wired the lights in. They are working now. But I want to use the factory set up. Here is what I found the wire harness and everything is in place from the factory. There are 2 empty fuse slots under the hood for left/right driving ligh, t on the other side of the engine compartment there is a black box with a empty slots for what looks like a relay. The slot is market drving lights. The only thing missing I think would be the switch. So if I hook my lights to the factory wires, add fuses and relay, plus switch. They should work. Is this the way to go??? Thank You for you help

Anthony

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factory Driving Light wiring Nissan Sentr

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.