Newbe power hookup question

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Newbe power hookup question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

burly

Member - Posts: 4

Joined: November 04, 2003

Posted: November 04, 2003 at 10:05 PM / IP Logged

I have just purchased a NESA DVD player with three wires for the power and ground. They are labeled:

RED -ACC

BLACK-GRND

YELLOW- B+

The manual does how to show hook up. I assume the YELLOW is hooked up to the battery or constant power because the ground and yellow are run through a fuse. Any help

Thanks

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: November 04, 2003 at 10:08 PM / IP Logged

yellow would be constant(battery,constant to ignition,etc) the red will go to an accesory wire or ignition in car you may take this to the radio fuse if needed, the black goes to ground thats it pretty easy.

Search for other posts by mobiletoys2002

burly

Member - Posts: 4

Joined: November 04, 2003

Posted: November 04, 2003 at 10:19 PM / IP Logged

Thanks:

That is what I thought but just checking anyways.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Newbe power hookup question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.