Power Windows

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Power Windows (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

DjIQ

Copper - Posts: 107

Joined: March 10, 2003

Location: United States

Posted: November 12, 2003 at 6:47 AM / IP Logged

Anyone know how do unattach the window from the arms on the power windows for a 86 honda prelude, I think my motor may be bad, also if anyone knows how to troubleshoot this your help would be greatly appreciated.

Back to Top

joshuahoule

Member - Posts: 5

Joined: November 10, 2003

Location: United States

Posted: November 14, 2003 at 1:07 PM / IP Logged

Remove the door panel and the plastic. then move the window up or down

until the two 10mm bolts lign up with the holes. the bolts are in the center of the

bottom of the window. you will need an extension to reach them.

jhouligan

Back to Top

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: November 15, 2003 at 2:20 PM / IP Logged

then just pull the windows out the top of the seal

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power Windows

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.