Amp questions PG TI series and more

Home / the12volt's Install Bay / Car Audio / Amp questions PG TI series and more (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kallen81

Member - Posts: 1

Joined: November 14, 2003

Location: United States

Posted: November 15, 2003 at 12:32 AM / IP Logged

Whats the differance in SVC & DVC I just received in the mail 2 Pheonix Gold TI12s SVC and plan on running all PG TI Amps. I'm having problems with the amp configuration I need to power the 2 subs and PG Elite 6 Componet speker system with a RMS of 300w and the subs I belive have a 600w rms. I bought a PG TI600.2 with plans to power L and R Fronts but I'm not sure if this was the right amp. I thought being a 600 watt amp I could provide 300 to L and R fronts but the specs only show 150w rms into 4 ohms 600 bridged. I am staying with the PG TI amps but not sure of the which ones to use for best SQ and correct power. I have read all the post in the fourm and there are lots of post similar to this and got a lot of good info from several of you who reply regularly I would welcome any suggestions in fact I would be very greatful for you comments.

oh yea the TI600.2 does not have to stay I would sell it and buy a different setup if one exist for front L and R at 300 RMS but it would have to be in the PG TI Componets

thanks

Run Forrest

Back to Top

gtpsrock

Member - Posts: 20

Joined: June 12, 2003

Location: United States

Posted: November 15, 2003 at 12:57 AM / IP Logged

Hey PG friend.

I have a PG Titanium 1000.2 and love it. Definately stick with 'em.

I am on the Phoenix Gold "Soundoff" forum. You could go there and check out their FAQ's and ask around.

Give this a shot:

http://soundoff.phoenixgold.com/index.php

The guys there are really cool.

Paul

My '97 GTP's Stereo

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp questions PG TI series and more

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.