constant to momentary prob

Home / the12volt's Install Bay / Relays / constant to momentary prob (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

2000vsm

Copper - Posts: 65

Joined: June 30, 2002

Posted: July 23, 2002 at 10:43 AM / IP Logged

ok, the special app relay section for the "constant to momentary", i can't get more than a 1/4 sec pulse from the relay.. i put in a 1000uF cap and a 100,000 OHM resistor and still gives me no difference.

can anyone tell me why?

Back to Top

go2pac

Copper - Posts: 179

Joined: May 04, 2002

Location: California, United States

Posted: July 23, 2002 at 5:14 PM / IP Logged

use a higher value cap like maybe a 4700uf with the 10k resistor

Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976

Back to Top

2000vsm

Copper - Posts: 65

Joined: June 30, 2002

Posted: July 23, 2002 at 10:46 PM / IP Logged

yeah that was the damn problem.. cap was the limiting factor... so i got 1000uF.. i hope that will ALWAYS trigger the door locks... cuz i had 4700uF but the cap is big and i didn't want to use it cuz it had a 1.5 sec delay... well hopefully this 1000cap will do... i should have gotten 2000

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

constant to momentary prob

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.