2000 Sunfire manual trans remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Sunfire manual trans remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

logger

Member - Posts: 14

Joined: December 28, 2002

Location: Canada

Posted: November 17, 2003 at 7:02 PM / IP Logged

I am installing an Autostart in a Sunfire stick, I can't get the door switches right. Can anyone help? I read some where that I need a diode for each door because of different wiring.

This one is driving me nuts!

Any ideas?

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: November 17, 2003 at 8:40 PM / IP Logged

hi the wires you need are light GREEN/ blk and lt blue diode isolate and puit band side of diode toward car also the park brak wire is lt blue in plug above drivers kick

kirk

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Sunfire manual trans remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.