door trigger 94 grand am

Home / the12volt's Install Bay / Car Security and Convenience / door trigger 94 grand am (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

damien0304

Member - Posts: 4

Joined: March 26, 2002

Location: United States

Posted: November 17, 2003 at 9:27 PM / IP Logged

just installed crimestopper cs2015rs on 94 grand am. when arming alarm, for about 30 seconds the lcd remote shows the doors are open. i made sure that door trigger delay was set to 60 seconds instead of 5, but it still does it...any suggestions would be helpful. thanks

door trigger 94 grand am - Last Post -- posted image.

Back to Top

mazdatruckin

Copper - Posts: 69

Joined: September 10, 2003

Posted: November 18, 2003 at 8:36 AM / IP Logged

which wire did you use for your door trigger. I would use the individual door triggers and isolate them. Some domelights have that delay and its annoying.

The driver door trigger wire is lt. GREEN/ black and the rear door trigger wire is yellow, both in the driver kick panel. The passenger door is lt. blue in the passenger kick panel. Use all wires and diode isolate.

Try that.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door trigger 94 grand am

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.