WIN-DATA GM Databus Window Module ?

Home / the12volt's Install Bay / Car Security and Convenience / WIN-DATA GM Databus Window Module ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

atomsite

Member - Posts: 36

Joined: November 13, 2003

Location: United States

Posted: November 19, 2003 at 4:43 PM / IP Logged

What signal is needed here on the blue and green wires? Do the windows keep driving as long as the line is held low? Or do the windows drive all the way up/down when there is a low pulse. If a pulse, what minimum duration should it be?I assume all the windows in the vehicle are controlled simultaneously. i.e. There is no way to choose a specific window. https://shop.bypasskit.com/OriginalManual/WIN-DATA_010302_I.PDF

Back to Top

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: November 24, 2003 at 11:50 PM / IP Logged

i would say a pulse so you could use the doorlock outputs

Joe O'Byrne

Owner / Installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

WIN-DATA GM Databus Window Module ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.