96 Camaro Trunk Pop Problem

I have a 1996 camaro v6.  I have a carbine 5600-plus.  I hooked up the relay for the trunk release fin i think but it only releases the trunk when i open up the doors after disarming the system...i was told that i might not be waking up the BCM or ECM i forget which one but was never told what to do to fix it .....any help would be greatly appreciated.  Thanks

Year(s): 96-02

Make(s): Chevrolet/Pontiac

Model(s): Camaro/Firebird

Trunk/Hatch	18ga. ORANGE / Black (-) at driver’s kick panel
Hood Pin
Trunk Release	18ga. BLACK/ White (+) or Brown (+) at hatch release switch (may show as negative on some models)

Hey bub, are you using these wire? These always work for me.dan

Remember (there are no hard cars,some just take longer to install on then others)

OK ....i have my relay wired as such:  (-) form alarm to 86, 12v+ to 85, (-) to 30 and 87 to the BLACK/ white at the switch.  The relay clicks but no trunk pop......i tried the ORANGE / black  at the drivers kick  being hooked up to 87 and still no trunk release.....tell me whats wrong please.....do i have to use all three wires or what...

thanks guys it works now...