the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 Hyundai Tiburon


Post ReplyPost New Topic
< Prev Topic Next Topic >
nei00755 
Copper - Posts: 61
Copper spacespace
Joined: October 23, 2003
Location: United States
Posted: November 23, 2003 at 2:36 PM / IP Logged  

I need alarm and remote start wiring diagrams for a 03 tiburon.  any help would be appreciated. thanks

jeff

ck auto 
Copper - Posts: 257
Copper spacespace
Joined: September 20, 2003
Location: Canada
Posted: November 23, 2003 at 2:58 PM / IP Logged  

Hyundai

Tiburon

2003

Remote Starter Wiring Colors and Notes

Function

Vehicle Color

Location

Start:

White (+)

Ignition switch harness

Ignition #1:

Red (+)

Ignition switch harness*

Ignition #2:

N/A

Ignition switch harness

Ignition #3:

N/A

Ignition switch harness

Accessory:

Pink (+)

Ignition switch harness

Brake Light:

White (+)

Brake pedal switch

Tach Signal:

White (AC)

23 pin connector in passenger kick panel

Parking Lights:

Pink/Black & GREEN/ Oranger (+)

22 pin connector @ BCM**

Notes:

*This vehicle is equipped with a transponder immobilizer system. Use Universal Alarm Bypass Module part # 2X402 where X can be any number or use vehicle specific bypass module part # 23554. **The Body Control Module (BCM) is part of the fure/relay box under the driver side dash.

Alarm and Keyless Entry Wiring Colors and Notes

Function

Vehicle Color

Location

Constant +12 Volts:

Red (+)

Ignition switch harness

Starter Kill:

White (+)

Ignition switch harness

Ignition +12

Red (+)

Ignition switch harness*

oEM Horn:

GREEN/ Black (-)

Steering column harness

Power Lock:

Yellow (+)

12 pin connector @ BCM***

Power Unlock:

Blue (+)

12 pin connector @ BCM***

Trunk Release:

Blue (+)

Drivers kick panel

Notes:

***The yellow wire will test when moving the driver lock knob, the blue wire will test when moving the passenger lock knob. See Note #201 Negative Trigger Door Locks

hi here is the wireing be careful there is screw hidden behind panel below radio to take knee bolster off. sorry about the bold but i cant get it to turn off.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer