2003 Toyota Tundra remote start/locks

Does anyone have a wiring diagram for remote starter and locks for 2003 Toyota Tundra? ThanksButton

12V - WHITE/ red or white - ignition harness starter - GREEN/ black or BLACK/ white - ignition harness (make sure you check this one good got this info from one source, but i have never worked on this truck and do not know which wire it will be, it could be both, although my source also said there is no second starter) Ignition - BLACK/ red - igniton harness 2nd Ignition - BLACK / YELLOW - igniton harness Accessory - blue/red -igniton harness Power Lock - WHITE/ green - DKP or door harness (meter this wire while urning key in driver key cylinder) Power Unlock - blue/white - DKP or door harness (Meter these wires while turning the key in the driver door key cylinder. Unlock requires a double pulse) Parking Lights(+) - green - DKP Door trigger(-) - green - DKP or door harness Tach wire - black or blue/white - instrument cluster, brown plug. (It is black on the 6 cylinder models, and blue/white on the 8 cylinder models, at the instrument cluster. On the 6 cylinder models the black wire is also found on the driver side of the motor at the diagnostic connector. On the 4.7L V8 can also use BLACK/ blue at coil 1 on the driver side.) Brake wire - GREEN / WHITE - brake pedal switchRemember check all your wires with a DMM!

Thanks for the info. It is very much appreciated.Button