the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Ford Explorer Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: November 25, 2003 at 8:22 PM / IP Logged  

Hi I am looking for the wiring info to do a remote start in a 2004 Ford Explorer.

Thanks.

Do it right the first time, only a doctor can bury his mistakes.
Montrealler 
Copper - Posts: 155
Copper spacespace
Joined: October 05, 2002
Location: Canada
Posted: November 26, 2003 at 8:07 AM / IP Logged  
this is for the 2003 explorer sport
Check the section you want to print Print the Infotech    
ITEM WIRE COLOR POL LOCATION INFOTECH # PHOTO NOTE
12 VOLTS   yellow + ignition harness    
STARTER 1   RED / lt. blue + ignition harness    
STARTER 2   n/a      
IGNITION 1   lt. GREEN/ purple + ignition harness    
IGNITION 2   n/a      
IGNITION 3   n/a      
ACCESSORY 1   brown (x2) + ignition harness    
ACCESSORY 2   BLACK/ green + ignition harness    
POWER LOCK   pink / YELLOW    driver kick panel   On models with keyless entry the door locks are negative trigger. Without keyless entry they are 5wi reverse polarity.
POWER UNLOCK   pink/lt. green    driver kick panel   On models with keyless entry the door locks are negative trigger. Without keyless entry they are 5wi reverse polarity.
DISARM NO UNLOCK   see factory alarm disarm      
FACTORY ALARM ARM   arms on lock      Arms on lock only with door open. It is necessary to send a signal to door trigger as well as lock to arm factory alarm.
FACTORY ALARM DISARM   dk. GREEN/ purple - driver kick panel    
DOORLOCK MOTOR   pink/black 5wi driver kick panel    
DOOR UNLOCK MOTOR   RED / orange 5wi driver kick panel    
PARKLIGHTS POSITIVE   WHITE/ black or brown + headlight switch or dkp    
PARKLIGHTS NEGATIVE   WHITE/ purple - csm behind glove box    
REVERSE   BLACK/ pink + driver kick panel    
BRAKE   lt. green + brake pedal switch    
DOOR PIN   yellow/black (l), gray/red (r)   - each door harness   Use both wires and diode isolate each from the GEM module, refer to DirectFax document 1076 for wiring information.
HOOD PIN   tan/lt. green - driver kick panel    
TRUNK PIN   WHITE/ purple - driver kick panel    
DOMELIGHT SUPERVISION   use door trigger      
TACH   tan / YELLOW   ac pcm   The PCM (Powertrain Control Module) is located at the top of the firewall towards the passenger side. The tan / YELLOW tach wire is also found at the back of the instrument cluster. Can also use any tan/stripe wire at the coil pack.
TRUNK RELEASE   n/a      
SLIDEDOORS   n/a      
HORN   yellow/lt. green - steering column   
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: November 26, 2003 at 3:28 PM / IP Logged  
Thanks very much for the information Montrealler.
Do it right the first time, only a doctor can bury his mistakes.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 3, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer